If you have noticed that your gutters have been sagging, there is likely a reason for it. Gutters that sag can cause a variety of problems, such as water damage to your home’s roof and foundation. Luckily, there is a simple and affordable solution to this problem—gutter repair.
If your gutters are only slightly sagging, you may be able to fix the problem by tightening the screws or nails that hold them in place. If the gutters are severely sagging, however, you will likely need to replace them.
Replacing gutters can be a daunting task, but it is a job that can be completed by a beginner. All you need is a ladder, a tape measure, a level, a hacksaw, and some silicone caulk.
The first step is to measure the length and width of your gutter. Once you have these measurements, you can use them to purchase new gutters that are the same size.
The next step is to remove the old gutters. This can be done by using a hacksaw to cut the nails or screws that hold them in place.
Once the old gutters have been removed, it is time to install the new ones. This can be done by following these simple steps:
- Measure and mark the location of the first gutter on the roof.
- Use a ladder to reach the roof, and then use a level to ensure that the gutter is level.
- Apply silicone caulk to the roof where the gutter will be installed, and then install the gutter using nails or screws.
- Repeat these steps for the remaining gutters.
If you are not comfortable installing the gutters yourself, you can always hire a professional to do it for you.